Frequently asked questions
Everything you need to know about imprints, ink, surfaces, lead times and ordering. Can't find it? We're happy to help.
Product
A hand roller that prints your logo as one long band. A normal stamp makes one print at a time.
Rolly is a roller stamp for branding. It prints your logo, text or web address as a continuous band on boxes, paper bags, kraft paper, tissue and other packaging.
You roll it across the surface and get a straight, repeating line, as long as you need.
A normal stamp:
- makes one print at a time
- has to be lined up by hand for every print
Rolly:
- prints a continuous band in one move
- is much faster when you have a pile of boxes
- leaves no gaps and no crooked prints
- makes plain packaging look printed to order
15mm or 30mm tall, and as long as you roll.
There are two band heights. The model you choose decides how long your design is before it starts again.
15mm band0.6" band, right for a name, a web address or a slogan in one line:
- Rolly M: the design repeats every 15cm the design repeats every 6"
- Rolly L: repeats every 20cm repeats every 8"
- Rolly XL: repeats every 33cm repeats every 13"
30mm band1.2" band, with room for two lines or a bolder logo:
- Rolly 3.0: repeats every 15cm repeats every 6"
On every model the design repeats in a loop while you roll, so the band itself can be as long as you like.
Put the marker in, roll with light pressure, cap the marker.
- Put the marker into the handle.
- Check the tip. It should sit flush against the roll, because that is how the ink reaches your design. You can adjust the pressure at the base of the handle.
- Roll. Place the Rolly on the surface and roll smoothly in one move. Light pressure is enough, and pressing hard does not make the print better.
- Close up. Put the cap back on the marker when you are done, so the tip does not dry out, and put the roll cap on to keep wet ink off your hands and clothes.
The full walkthrough with pictures is on the How it works page.
Yes. Swap the roll or the head and keep the handle.
You never need a new Rolly for a new design, season or campaign. Every Rolly has the same handle, so one handle can carry all your designs.
There are two ways to change it:
- A new roll. For the Rolly 3.0, M and L you can order an extra roll with another design. Pull out the stick, swap the roll and push the stick back in. It takes a few seconds.
- A new head. For any model, the XL included, you can order a Rolly head with a new roll already fitted. Twist the old head off the handle and twist the new one on. No tools needed.
Many customers keep one roll for their logo and a second one for a season or a campaign.
Yes. Every Rolly has the same handle.
Only the head and the roll are different between models. So if you start with one size and later want another, you add a head. You do not buy a whole new Rolly.
- Have a Rolly M? Add an L or XL head for a longer design. It uses the same 15mm marker you already have. for a longer design. It uses the same 0.6" marker you already have.
- Want the wide band? A Rolly 3.0 head prints 30mm, so it needs a 30mm marker too. prints 1.2", so it needs a 1.2" marker too.
One line: M, L or XL. Two lines or a detailed logo: the 3.0.
It comes down to how tall and how long your design is.
- One line of text, a name or a simple logo: choose a 15mm band. The choose a 0.6" band. The Rolly M fits a short name, the Rolly L a name with a website, and the Rolly XL a longer line such as a slogan.
- Two lines, a detailed logo or a bolder mark: choose the 30mm choose the 1.2" Rolly 3.0.
Not sure? Send us your logo. We suggest a size and send you a sketch before you order, so you see how it will look.
Yes. There is no subscription.
There is nothing to renew, and you do not need to buy new rolls on a schedule. The handle and your roll simply keep printing.
The only thing that runs out is the ink. When it does, you refill the marker or buy a new one.
Ink & surfaces
No. You add it, so the ink matches your packaging.
A Rolly comes with the handle, the head with its stick, your roll and a roll cap. The marker is sold separately on purpose: the right ink and colour depend on what you print on, and we would rather you choose than pay for a marker that does not suit.
Which one you need:
- Rolly M, L and XL: a 15mm marker0.6" marker
- Rolly 3.0: a 30mm marker1.2" marker
The Rolly page offers a marker that fits, or a marker with paint, before you add to cart. If you already have suitable ink, you can also order the Rolly on its own.
15mm markers fit the Rolly M, L and XL. 30mm markers fit the Rolly 3.0.
For the Rolly M, L and XL (15mm):For the Rolly M, L and XL (0.6"):
- Molotow ONE4ALL Acrylic Marker
- Molotow COVERSALL 660PI
- Molotow 611EM, empty or filled by us
For the Rolly 3.0 (30mm):For the Rolly 3.0 (1.2"):
- Molotow Transformer Long, empty or filled by us
These are the markers we sell, have tested with the Rolly and stand behind. You find them all on the markers page.
Another marker with the same tip size may work as well. We have not tested it, so try it on scrap paper first.
They are the ones that printed evenly every time we tested.
On a Rolly a marker has two jobs. Its tip has to fit the band and reach the roll. And its ink has to hold on your surface.
When we developed the Rolly we tried a lot of different brands and kinds of ink against those two jobs: acrylic, alcohol based and others. We kept only the ones that gave an even print every single time, from makers whose markers are built to last.
ONE4ALL for most packaging. COVERSALL for a permanent glossy black.
It depends on the surface you print on, and on the look you want.
| ONE4ALL | COVERSALL | |
|---|---|---|
| Kind of ink | Acrylic paint | Alcohol based ink |
| Best on | Paper, cardboard, kraft | Paper, cardboard, kraft, metal, wood |
| Look | Matte, many colours | Glossy black |
| Stays on | Yes | Yes, permanent |
- Most packaging customers start with ONE4ALL. It covers well and comes in many colours.
- Printing an inverted design, where the band is solid ink and the text stays blank? Take COVERSALL. Acrylic paint can leave bubbles there.
Still unsure? The ink matcher on the markers page asks what you print on and picks for you.
Paper and cardboard packaging first. Other materials after a test.
Start with the surfaces it prints on most reliably:
- kraft paper and cardboard
- mailer boxes and paper bags
- tissue
- paper packing tape
Possible with the right ink: wood, fabric and other materials. Texture and coatings change how the ink holds, so always try a spare piece before you print a batch. On very smooth surfaces the roll can slip a little with permanent ink, so go slowly.
Not for: food or soap. The markers are not made for those.
Refill the marker or buy a new one. Your Rolly and your roll stay.
Refill it. Top the marker up from a refill bottle. We have one for each ink:
- ONE4ALL paint, 180 ml, for ONE4ALL markers. One bottle refills a marker about 5 to 6 times.
- COVERSALL Cocktail, 250 ml, for COVERSALL markers. One bottle refills a marker about 6 to 8 times.
Refill a marker with the same ink it already holds. Mixing the two stops it printing.
Or simply take a new marker.
Refillable markers and refill bottles are on the markers page.
Prefilled is ready to roll. Empty is for the ink you choose.
- Prefilled: arrives full. Put it in the handle and print.
- Empty: arrives empty, for you to fill from a refill bottle in the ink and colour you want. Add a refill bottle to your order, because the marker prints nothing without it.
Use one product per marker. COVERSALL is an ink and ONE4ALL is an acrylic paint. They are made differently, and if you mix them in one marker the ink thickens and stops printing.
Custom & lead times
You or us, whichever is easier. It costs nothing either way.
There are three ways, and you can pick any of them.
- We do it for you. Send your text or logo with your order and our designer sets it up for free. You can also write to us first, get the design ready, and order after that. We do not draw new logos or graphics. We take what you send (text, logo, wishes) and fit it to the band so it prints well and looks the way you had in mind. If it helps, we show you a few versions to choose from.
- Your own designer. If you have a designer, or you know your way around design software, prepare the file by following our artwork guidelines.
- The online designer. Lay out your text and logo yourself in our designer. You see the band as you build it, and your order reaches us with the design already attached.
Whichever way you choose, you get a free proof first, and we make nothing until you approve it.
Usually, yes. A design from the designer goes to production as it is.
When you build your design in the designer, it arrives with your order, ready to make. We usually change nothing in it, so there is less back and forth and most of the time we can make it sooner.
What you approve is what we make. Your Rolly is produced exactly the way you approved the design. So before you approve, take a minute to check:
- the spelling
- the size of the text and the logo
- the spacing between them
If we see something that cannot be printed, we tell you before we make anything.
Yes, that is the whole point.
Every Rolly is made with your own design.
- Text: type it when you order.
- Logo: attach it as a PNG, JPG or SVG and we prepare the artwork for you.
Either way we send you a free proof to approve before anything is made, so there are no surprises. The artwork guidelines show what prints best.
Yes. Pick one in the designer, or name the one you want.
The designer has a range of fonts, and you can try your own text in each of them to see how it looks on the band.
Want a font that is not there? Name it when you order or send us a message. We set your text in it and show you the result on your free proof.
Yes, up to 5mm of blank space.
Why only 5mm:Why only 0.2": the marker tip rests on the roll. In a wider empty stretch the tip drops into the gap, and the Rolly stops rolling smoothly.
If you want more room between repeats: we fill the gap with dots, bars or a small separator shape. It keeps the roll turning evenly and still gives your logo air. You see exactly how it looks on your free proof.
Not always. Very fine details are too small to print cleanly.
Tiny symbols such as ™ and ®, and hairline strokes, are too fine at this size. The ink fills them in or they do not show at all.
What we do: we remove them or make them thicker, and show you the change on your free proof before anything is made.
The designer will not let you add your design to the cart? Then it has found details like these. Send us the file and we fix it for you.
Only as a flat version. A Rolly prints one solid ink.
A Rolly prints in a single solid ink, so shading, shine and shadows come out as dark blots.
What to send: a flat version of your logo, black on white.
- best: SVG, PDF or AI
- also fine: a sharp PNG or JPG
Only have the shaded version? Send it anyway. We rebuild it as a flat logo and show you the result on your proof.
Yes, if you want us to. But a very complex image may not print cleanly.
We look at every image before we make it. If yours is very complex, we tell you, and you choose:
- Send a simpler image. This gives the cleanest print, and it is what we recommend.
- Print the image as it is. We make the roll exactly from the image you approved.
If you choose to print it as it is: fine parts can fill with ink or not show at all. That comes from the image, not from a fault in the Rolly, so we cannot replace or refund it for that reason.
Not sure which way to go? Ask us and we tell you honestly what to expect.
Add to cart, pay by card, then approve your free proof.
- Check the artwork guidelines. A quick look at the guidelines tells you what prints well.
- Add to cart. Your Rolly, and a marker that fits it.
- Pay by card at our secure Stripe checkout.
- Get your confirmation. It arrives by email right away.
- Approve your proof. We contact you to finish the artwork and send a free proof. We make your Rolly only after you approve it.
It is made to order, after you approve the proof.
- Custom Rollys and rolls are made to order after you approve the proof.
- Markers and refills are in stock and are not made to order.
Delivery takes additional time. See "How long does delivery take?" for your country.
Monday to Friday, 10:00 to 18:00 Estonian time.
You can order on the site any day, at any time. We work on your order from Monday to Friday, 10:00 to 18:00 Estonian time.
What that means for you:
- An order or a message in the evening or on the weekend is picked up on the next working day.
- Proofs and replies come on working days.
- Production and shipping happen on working days too, so a weekend does not count toward the time it takes.
Yes, until it ships.
Just reply to your order email. You can:
- add items
- change the design, as long as you have not approved the proof yet
- correct the delivery address
If the change costs more, you pay only the difference.
Not once production starts, because it is made to your design.
- Custom Rollys and rolls: once you approve the proof and production starts, they cannot be returned or cancelled for a change of mind.
- Faulty, damaged or wrong items: tell us within 24 hours of delivery and we put it right.
- Unused markers and refills: these are stock items, and you can return them within 14 days of delivery.
Full details are on the returns page.
Shipping & delivery
To the EU, UK, US, Canada and other supported countries.
We ship from Estonia with Omniva and partner carriers.
Select your country in the cart to see the shipping options and the price. The final price and any taxes are always shown before you pay.
3 to 17 business days in the EU, longer further away.
These are Omniva's own estimates, counted after production:
| To | Business days |
|---|---|
| EU | 3 to 17, depending on the country |
| UK | 5 to 9 |
| US and Canada | 7 to 20 |
| Elsewhere | 6 to 34 |
The cart shows the window for your country. You get a tracking link by email the moment your order leaves us.
So the courier can text you when your parcel arrives.
The courier uses it only for delivery. If your parcel goes to a parcel machine, the pickup code comes by text message, so it has to be a mobile number.
Use the Track your order link in your confirmation email.
That page stays up to date and shows:
- your proof
- where your order is in production
- the tracking number, once it ships
They leave a notice and try again.
If delivery still fails: contact your local post office with your tracking number, before the parcel is sent back to us. They can usually hold it for you or arrange a new delivery.
If the parcel comes back to us: we can send it again for the cost of the return shipping.
Business
Yes. Quotes, invoices and volume pricing.
We support volume pricing, campaigns with several rolls, purchase orders and invoicing. We work on prepayment and provide a quote and an invoice.
Send us your quantities and artwork with the quote form and we reply with a quote and an invoice.
Yes, and there is no minimum order.
- Extra rolls cost less when you buy them together with a Rolly.
- Markers cost less in larger quantities.
The current offers are on the deals page. For a bigger business order, ask for a quote with the quote form.
Yes. Add your company at checkout.
At checkout, choose a company and add the company name and VAT number. Both appear on your invoice.
Prefer to pay by bank transfer? Message us and we send you an invoice to pay before production.
Care
Tell us within 24 hours, with photos. We replace or refund.
What to send us:
- your order number
- photos of the item and of the packaging
We judge it from the photos, so there is nothing to ship back. Then we send a replacement or a refund.
Why 24 hours: we cannot refund or replace damage that is reported later than that. So take the photos first, before you clean or refill anything.
It is nearly always the marker. Check three things.
- Is there ink in the tip? A tip can dry out. Shake the marker and pump the tip on scrap paper until it is wet again.
- Does the tip sit flush against the roll? If it does not reach, no ink gets onto your design. Adjust the pressure at the base of the handle.
- Is the surface clean and dry? Dust and damp stop the ink from holding.
Then roll with light, even pressure. It prints better than pressing hard.
A new marker that still will not print after these checks? Tell us within 24 hours of delivery, with photos of the marker and a test print, and we replace it. We cannot replace a marker reported later than that.
Check the tip size: 15mm for the M, L and XL, 30mm for the 3.0.
Every marker we sell is tested to fit its band width exactly, so a marker from us should always reach the roll.
Bought a marker somewhere else? Check its tip size:
- Rolly M, L and XL: a marker with a 15mm tipmarker with a 0.6" tip
- Rolly 3.0: a marker with a 30mm tip, or a refillable 30mm marker a marker with a 1.2" tip, or a refillable 1.2" marker
Roll off the ink, cap the marker, keep solvents away.
A Rolly needs very little care.
- After printing: roll it on scrap paper until no colour comes off.
- Every time: put the cap back on your markers, or the tip dries out. Put the roll cap on before you put the Rolly away.
- Never: wash the roll with solvents. They can damage the surface that carries your design.
Message us. We reply within one business day, Monday to Friday, 10:00 to 18:00 Estonian time.
If your question is not here, write to us on Telegram or send the contact form. We reply within one business day and we will figure it out together.